Sentence examples for electrical transfer from inspiring English sources

The prepared samples were subjected to 10% or 13% SDS-PAGE, followed by electrical transfer onto a nitrocellulose membrane using the Trans-Blot Turbo system (Bio-Rad).

An expert hired by the plaintiffs, Jerry Watts, concluded that the floodwaters shorted out Memorial's electrical transfer switches and many distribution panels, much as the plant operations director had predicted.

In this paper, we describe the fabrication of a hybrid LH-FEBT using pentacene and ZnO as the p- and n-type semiconductors, respectively, and describe its unusual bell-shaped electrical transfer characteristics.

Because these conductive particles are only capable of charge transfer over a very short range, most do not interact with the percolated paths nor do they participate to the electrical transfer.

The acoustic transfer admittance of the coupler, including the thermal conductivity effect of the fluid, must be modelled precisely to obtain the accurate sensitivity of the microphones from the electrical transfer impedance measurement.

The requirement at CERN for 1 kA range High Temperature Superconducting (HTS) cables optimized for long electrical transfer has led to the design and assembly of a novel type of cable that can be made from pre-reacted MgB2, Bi-2223 or YBCO tapes.

As discussed above, the electrical transferred mechanisms of I V curves results, the metal filament path diagram model of the Gd:SiO2 RRAM devices was described.

The switching resistance mechanisms in the SCF-treated ITO electrode of RRAM devices for HRS/LRS were proved and investigated by electrical transferred mechanisms and a metallic filament path diagram model.

In order to further discuss the initial metallic filament path diagram model, the electrical transferred mechanisms of RRAM devices for the SCF-treated ITO electrode were discussed and investigated.

In addition, the electrical transferred conduction mechanism of the initial metallic filament-forming model was explained to bipolar switching properties of RRAM devices on ITO electrode in this study.

Fig. 4 The electrical transferred mechanisms and metallic filament path diagram of the Gd:SiO2 RRAM devices using SCF-treated ITO electrode for a set state under the negative voltage and b reset state under the positive voltage.