Sentence examples for electrical power inputs from inspiring English sources

In this study, the effect of liquid height on sonochemical oxidation reactions was investigated for two sizes of bath-type sonoreactors under very similar electrical power inputs for 291 kHz (74.5 W ± 2.1 W and 74.9 W ± 4.4 W) and 448 kHz (87.2 W ± 4.6 W and 92.4 W ± 4.7 W).

Cooling power was determined by measuring the electrical power input into Kapton® insulated flexible heaters (Omega KHR-2/2-P) attached to the back of the copper emitters.

Electrical measurements are also reported that establish that minimal electrical power input is required to produce the observed flame instabilities.

The Taylor scale λ is correlated with the electrical power input Π for the fans producing turbulence.

The model expresses the water flow output (Q) directly as a function of the electrical power input (P) to the motor-pump, for different total heads.

This work seeks the experimental evidence in sliding-vane compressors by measuring the air standard volume flow rate and the electrical power input of three diverse configurations.

When electrical power input is assumed to be a measure for turbulent production, dimensional arguments based on a volume-averaged large-scale estimate for viscous dissipation lead to the foregoing correlation for homogeneous turbulence.

Also, it was found that while a small electrical power input of about 5 W achieves an attenuation factor of about 0.5, four times as much power (20 W) is needed to halve again the attenuation factor to 0.25.

As aimed in this study, a thermal inefficiency model (TIM) was developed using a pseudo-steady-state heat balance, i.e., equating the electrical power input to the rate of heat transfers from the bed to the gas.

A simple model was developed based on steady state energy balances, i.e. equating the electrical power input separately to the rate of heat transfer from the heater walls to the bed and from the bed to the gas.

A practical design case on the 5200 9800 W capacity range of the STC family using R22 refrigerant has been implemented, and to achieve a common share percentage of 80% for the major components of this STC series plus a coefficient of performance based on electrical power input (COPel) of over 3.02 for each specified capacity of this family.