Sentence examples for electrical data are from inspiring English sources

The oldest electrical data are publicly available for 2002; hence, we used this dataset.

The electrical data were recorded by a Keithley 2612 source meter.

All the electrical data were measured by devices with the area of 250 μm × 250 μm.

The high pressure electrical data were only obtained for water contents less than 8 wt%.

The sheet resistance and other electrical data were measured by four-probe meter (KDY-1), Hall effect measurement system (Lakeshore 7704A), and LCR meter (Agilent U1731B).

A table of the electrical data is shown in Table 2, for each time input, there are corresponding values for each of the four sensors (labelled Sensor 1...Sensor 4) and the physical location of the sensor (labelled Sensor 1 Location...Sensor 4 Location).

For these traces a +200 mV bias was applied, optical data was collected at 4.8 kHz and down-sampled to 1 kHz, while electrical data was collected at 20 kHz and low pass filtered to 10 kHz.

Mechanical, thermal, frictional, and electrical property data are provided.

Electrical resistivity data are in agreement with this interpretation.

These physical and electrical monitoring data are applied to diagnose and evaluate oversizing level in terms of runtime fraction (RTF) and cycling rate (N).

Experimentally measured electrical impedance data are least-squares fitted to a theoretical expression which accounts for the internal losses of a piezocomposite plate resonator vibrating in the thickness-mode.