"electrical angle" is a correct and usable phrase in written English.
You can use it to refer to the angle between two electrical components or to refer to an electrical conductor's route of travel in a circuit. For example, you could say: "The electrical angle of the armature winding must be kept within certain limits to ensure the performance of the circuit."
The analysis is focused on the estimation of the electrical angle of the fundamental frequency of the voltage measured in a wind turbine.
Dual Stator Induction machine consists of two stator winding separated by an electrical angle of 30°, with dissimilar pole to overcome the effect of harmonic current occurred in the stator windings.
Furthermore, it suggests a set of five tests aimed at guaranteeing the accurate implementation of two specific components of the fictitious grid, namely the estimation of the electrical angle of the mains frequency and the derivative of the line current measured at the wind turbine terminals.
The electrical angles of each voltage level are respectively denoted by θ 1,…,θ K,…,θ Kmax.
Moreover, in the 3D-UMa scenario, it is observed that when increasing the electrical downtilt angle from θ etilt=0° to θ etilt=10°, a slight performance improvement is achieved.
The procedure for targeting pyramidal neurons in layer V/VI was similar in its settings (for example, angle, electrical field), but performed at E12.5.
The effect of various parameters including electro-mechanical twisting coupling, layup thickness, actuators size, placement, and inclination angle, electrical voltage, stacking sequence, and geometrical dimension are taken into account.
In this work, we studied the surface morphology, sheet electrical resistance, contact angle, ultraviolet visible (UV vis) spectra, adhesion, and proliferation of living muscle cells on gold structure sputtered on glass surface.
To extend the concept to multi-machine power systems, the first attempt in [29] estimates the damping torque for each single generator using its own electrical torque, rotor angle and rotor speed trajectories based on the least square error.
Gradually gas lighting became standard, but in 1881 newly developed electrical companies began angling for the same contracts.
Standard methods to derive the third fractal dimension (D3) requires complex instrumentation such as electrical sensing and angle-dependent static light scattering.
