Sentence examples for electric height from inspiring English sources

In the following analysis, discussion about how the desks were used is framed around initiation of use, maintenance of use and the effect of manual versus electric height adjustment.

This may be the result of EMF energy absorption by the human body, which happens most strongly in the frequency range neighbouring the resonant frequency for the EMF absorption of electromagnetic energy (i.e., 40 80 MHz, where the equivalent electric height of the human body is close to 1/4 of the EMF wavelength).

The inputs in the formula are electric resistance, height, weight, age, and gender.

Two kinds of friction force, between iron powder and honeycomb walls, honeycomb and clamping plane, are both controllable by adjusting the parameters, such as electric current intensity, height of iron powder and air gap.

Body weight was measured to the nearest 0.1 kg using an electric scale, and height was determined to the nearest 0.5 cm using a wall-mounted measuring rod.

Electrode materials design of Schottky and photoconductive CZT devices is investigated by I-V electric analyses, barrier heights calculation and spectrum response.

Body weight was measured to the nearest 0.1 kg with an electric scale and body height to the nearest 0.5 cm by a wall-tapered height meter.

'FUTURE-PROOFED' HOUSING "It all begins in the home," says Stephen Burke of the charity United For All Ages: chairs and settees that are easy to use; levers instead of knobs and taps; electric sockets at waist height; floor lighting as used on aeroplanes which lights up as soon as a person gets out of bed; sensors to relay to others if a person has fallen; cushioned floors in the bathroom.

Fig. 7 Proposed concept showing enhanced daytime electric field at dynamo height of lower E region ionosphere during day.

In both cases, with the increase of electric field strength and height of QR, the localization of the electron is weakened, and as can be seen from Figures8 and9, the energy distance between the ground and first excited states decreases.

In Figures4 and5, the linear, nonlinear, and total absorption coefficients are shown as functions of the energy of the incident photon for several values of the electric field strength and height of the QR, respectively.