Sentence examples for electric breakdown from inspiring English sources

The dead load suppresses electric breakdown, enabling the elastomer to survive the snap-through electromechanical instability.

The paths of electric breakdown and cracks initiated from the edge of electrodes were observed.

The voltage can be increased, but electric breakdown will occur if the electric field inside the capacitor becomes too large.

The shell increases in potential until an electric breakdown occurs or until the load current balances the charging rate.

It was observed that the thin conductive polymer electrodes lead to the self-healing of the polymer after electric breakdown.

Experiments conducted on the home-made micro electrodes verifies that electric breakdown does not occur at 8000 V when air pressure is below 10−3 Pa.

The results are discussed in the light of the theory of electric breakdowns during anodization.

Beyond this point, electrical breakdown occurs and an electric arc causes flashover between the charged parts.

This is because that the electrical breakdown behavior is dominated by the nonlinear electric field.

GaN power Schottky diodes have many advantages over more conventional Si rectifiers, achieving a maximum electric field breakdown strength over 10 times larger and on-state resistance approximately 400 times lower at a given voltage.

The energy density (U) performance of capacitors can be expressed as U = ϵ ′ ϵ 0 E b 2 / 2, where Eb is electric field breakdown strength [1].