Sentence examples for elastic sealing from inspiring English sources

An elastic sealing ring was added in the middle of the collar, and gas tightness was realized by virtue of the interference matching between the elastic sealing ring and the casing thread.

The optical read-out of the cantilever response was less affected by the less elastic sealing method using the Nescofilm than using the O-ring.

The results indicated that the sintering temperature ranging from 1500 to 1600 °C was suitable for yielding mullite fiber matrix porous ceramics which had a low thermal conductivity (0.19 0.22 W/m K), a relatively high compressive strength (3 13 MPa) and a high resilience (66 70%) for applications in the thermal insulators and high-temperature elastic seal field.

When elastic contact pressure on sealing surface, P = (p1 p2 ··· p n )T, meets Eq. (1), (overline{P}_{text{AD}}) is the minimum mean contact pressure to realize a static metal seal for SPMCs, and the expression is bar{P}_{text{AD}} = frac{1}{n}sumlimits_{i = 1}^{n} {p_{i}^.

Sawa et al. [19] and Takaki et al. [20] studied the contact pressure on the sealing surface by elastic-plastic finite element analysis with regard of nonlinearity of gasket and internal pressure.

Pour only 3/4 full of liquid in each bottle and place a coffee filter on each one sealing around the edge with an elastic band.

Probably of equal importance in curtain-wall construction was the development of cold-setting rubbers during World War II; these form the elastic sealants that successfully seal the joints between glass and metal and between metal and metal against wind and rain.

Comparing the two sealing methods showed that the read-out of the Nescofilm seal was less affected by the elastic element, resulting in a more stable signal.

The sealing surface is formed by the squeeze between the internal surface of the sealing ring and the external surface of the pipeline, which makes the metal material on the sealing surface in a compression state and an elastic-plastic deformation occur.

Because the silicon rubber is elastic, it was used to seal the top of the aluminum base with vacuum grease and to keep the chamber airtight.

This container is sealed using an elastic diaphragm of PDMS, while it is heated via gold microheaters located on an underlying glass substrate.