Sentence examples for elastic seal from inspiring English sources

The results indicated that the sintering temperature ranging from 1500 to 1600 °C was suitable for yielding mullite fiber matrix porous ceramics which had a low thermal conductivity (0.19 0.22 W/m K), a relatively high compressive strength (3 13 MPa) and a high resilience (66 70%) for applications in the thermal insulators and high-temperature elastic seal field.

An elastic sealing ring was added in the middle of the collar, and gas tightness was realized by virtue of the interference matching between the elastic sealing ring and the casing thread.

The optical read-out of the cantilever response was less affected by the less elastic sealing method using the Nescofilm than using the O-ring.

Probably of equal importance in curtain-wall construction was the development of cold-setting rubbers during World War II; these form the elastic sealants that successfully seal the joints between glass and metal and between metal and metal against wind and rain.

The thickness of the upper gasket determines the depth of the photochemical reaction cell and therefore needs to be ∼70 μm thick, chemically resistant and sufficiently elastic to form a seal for the duration of the synthesis, up to ∼12 h for an array of 70mers.

A combination hydraulic-fluid-and-air suspension system has been developed in which the elastic medium is a sealed-in, fixed mass of air, and no air compressor is required.

When elastic contact pressure on sealing surface, P = (p1 p2 ··· p n )T, meets Eq. (1), (overline{P}_{text{AD}}) is the minimum mean contact pressure to realize a static metal seal for SPMCs, and the expression is bar{P}_{text{AD}} = frac{1}{n}sumlimits_{i = 1}^{n} {p_{i}^.

So we each fit a heavy black contraption over our noses and mouths, pull the elastic tight to form a seal and snap on our rubber gloves.

Because the silicon rubber is elastic, it was used to seal the top of the aluminum base with vacuum grease and to keep the chamber airtight.

The sealing introduced an elastic element to the chamber that induced minimal displacements of the glass cover.

This container is sealed using an elastic diaphragm of PDMS, while it is heated via gold microheaters located on an underlying glass substrate.