Sentence examples for efficiency explosion from inspiring English sources

The intention is the same, to create a model that will spark an efficiency explosion, laying the groundwork for an economic revival.

A delay of 0.05 s is applied to ensure the efficiency of explosion between two rows of blast holes and to improve fragmentation.

Fortunately, the moisture content of lignocellulose would improve pretreated efficiency of steam explosion or supercritical CO2 pretreatment.

This model requires two major assumptions to be made the level of congestion in the plant that provides obstacles for flame front acceleration, and the explosion efficiency.

In these applications the assumptions regarding explosion efficiency and charge strength selections have been calibrated against the results obtained through the CFD modelling, by obtaining a match of the explosion over-pressures.

In order to increase the efficiency of the explosion, the initiator had to emit a large number of neutrons in a few microseconds while the plutonium core was fully compressed.

The reason was lower efficiency of steam explosion pretreatment compared to NMMO pretreatment which results in lower digestion yield (scenario 4) and production of more solid residues (Table 3).

Aim of the project is to improve understanding of gaseous hydrocarbon oxidation processes to optimise efficiency and enhance gas explosion safety.

However, with the increase of spraying time of water mist and fraction of nitrogen going on, the amount of increase of explosion inhibition efficiency was gradually reduced.

To reduce the great losses caused by gas explosions in the gas transportation process and to improve the explosion venting efficiency in pipelines, a small pipeline with both a side vent and an end vent was developed, and premixed methane/air explosion characteristics were studied in the pipeline with different side venting areas.

Microbial pretreatment of OPFs was found to be the most exergetically efficient (90.93%) method with the highest thermodynamic sustainability index (TSI) of 9.32 compared to steam explosion (66.65% exergy efficiency and TSI of 1.56) and organosolv pretreatment (90.30% exergy efficiency and TSI of 7.43) methods.