The influence of dispersant, binder and current density on deposition efficiency and deposit morphology was studied.
The effect of pyridine, 2-picoline and 4-picoline on current efficiency (CE), deposit morphology, crystallographic orientation and polarization of the cathode during electrodeposition of nickel from acidic sulphate solutions containing boric acid were investigated.
Nanocrystalline silicon has shown remarkable coulombic efficiency when deposited as a thin film on Cu [36].
Device efficiency (lung deposited dose/nominal dose) varies for dry-powder (DPI) and metered-dose (MDI) inhalers.
The cycling efficiencies of deposited lithium on a nickel substrate in an EC + DMC (1 1) electrolyte containing LiPF6, LiBF4, LiN SO2CF3 2 (LiTFSI), or LiN SO2C2F5) (LiBETI) at 25 and 50 °C were improved by presence of VC.
Here D M is given by (1) D M = M Dep A cell, where M is the particle mass passing or floating over the cell layer during the exposure, Dep is the deposition efficiency (fraction of particles depositing onto the cell layer), and Acell is the area covered by the exposed cells.
However, a key to success is the ability (i) to produce, and maintain, a stable spray pattern with consistent trajectories, once the optimum operating conditions are determined for producing a coating with a specific microstructure; and (ii) to maximize the deposit efficiency.
Finally, even if an increase in the injected fuel amount should be considered to obtain the same air-fuel ratio for butanol-gasoline blend, if compared to pure gasoline, the better efficiency of fuel deposit burning allowed the reduction of that amount.
Adding Al2O3 to the feedstock powder increased the overall deposition efficiency, though the Al2O3 itself deposited less efficiently than the stainless steel.
As a result, its photocatalytic efficiency of the deposited film reaches maximum as well as antimicrobial activity of the deposited film when oxygen partial pressure is increased.
