Sentence examples for effects of flue from inspiring English sources

The developed numerical framework was employed to investigate the effects of flue wall design modification on combustion and emissions characteristics of ABF.

The study has demonstrated the applicability of the model for simulating the process and provided insights into the mercury control process especially the effects of flue gas flow rate, inlet mercury concentration, and activated carbon bed temperature on the process.

Basic research on the corrosive effect of flue gases has been performed at the BAM Federal Institute for Materials Research and Testing (Germany).

A sensitivity analysis was conducted to determine the effect of flue gas temperature, particle diameter, and SO2 concentration on the extent of sulfation.

Several studies have been carried out on the effect of flue gases on the growth of microalgae (Douskova et al. [2009]; Kastanek et al. [2010]; Borkenstein et al. [2011]).

Therefore, in this work the effect of flue gas was studied on C. reinhardtii at different levels of artificial light and in outdoor conditions with and without shade, as well as at two temperature levels.

Figure 4 shows the effect of flue gas losses on the maximum heat extraction on an example of a one pressure combined cycle power plant, which is further described in "Combined cycle power plant" and Table 1.

The negative effect of the 11.4% flue gas in the present experiment was in contrast to the stimulating effect of flue gas, probably due to lower O2 content, found in some studies on microalgae (Vance and Spalding [2005]; Douskova et al. [2009]; Kliphuis et al. [2011]).

The effect of Flue Gas Recirculation (FGR) on the decarbonation process during oxy-fuel combustion in a lime (and cement) rotary kiln is analyzed using an unsteady one-dimensional Eulerian Lagrangian mathematical model.

The simulation results indicate that air injection can improve oil recovery on the basis of CSS, in which over 11% of the incremental oil production can be attributed to the thermal effect, and the rest is accounted for a complex effect of flue gas driving.

In a dedicated test rig, effects of the flue gas components such as sulphuric acid aerosols and extremely fine particles like soot has been studied.