Sentence examples for effective height of the from inspiring English sources

Therefore, we assume the effective height of the ionospheric reflection is constant at 250 km for all ranges (we found that this value was appropriate for the 2011 Hokkaido radar data).

Crystallization thus commences from a heterogeneous mixture of native chains and chains with a longer persistence length (higher effective rigidity) and consequentially a lower effective height of the entropic barrier for crystallization.

The inner and the outer free surface shapes of the meniscus (Figure 1) were calculated from Young-Laplace capillary equation, in which the pressure difference across a point on the free surface is considered to be constant, where represents the effective height of the growth interface (Figure 1).

where h T and h R are the transmit and receive antenna elevations, respectively, and h Tg is either the air target altitude or effective height of the surface target, which in the first approximation may be considered as the half of the target height [17, 23].

In Eq. (7), ε y, l b, h b and h m are yield strain of longitudinal bars, bay length, beam height and effective height of the structures (which can be assumed to be 0.7 h n for framed structures), respectively.

The dispersion model indicates that magnification of concentrations relative to those in the absence of buildings is most sensitive to the aspect ratio of the street, which is the ratio of the effective height of the buildings on the street to the width of the street.

Based on the capacity for removal of COD, NH+4 N, and TN, the effective height of aged refuse in a SAARB was enough to be 900 mm.

The effective height of test section is 10 cm.

In assembled condition the effective height of a single draft pad is 50 mm.

The detected height of microseismic events could be used to determine H FO. If the height is larger than the thickness of pay zone, the thickness of pay zone (h) will be taken as the effective height of SRV zone (H FO).

In this case, even if the outside diameter of specimen remains the same, a variation in the position of the axis of the steel pulling bars allows the effective height (size) of the specimens to be varied.