Sentence examples for effect of the slab from inspiring English sources

However, the effect of the slab width, upon exceeding the effective flange width, became insignificant.

The shear capacity was defined by the material failure criteria of concrete, addressing the effect of the slab flexural stresses on the shear stress capacity of concrete.

Detailed analysis is presented to determine the effect of the slab insulation configuration on soil and slab temperature field and on the monthly variation of the total slab heat loss.

Because it is well known that the flexural effect of the slab has a strong influence in the response of these buildings, the methodology is based on the decomposition of the building behavior in two simple extreme cases, zero and infinite flexural stiffness between vertical elements, and horizontal ones.

The effect of the slab thickness on the quality factor and mode volume of photonic crystal slab nanocavities has been investigated, which both play pivotal roles in cavity quantum electrodynamics.

To describe the proposed macro-model, out-of-plane bending of the wall, and effect of the slab, the truss element, the elastic beam-column element, and the shell element of the OpenSEES (PEER 2001) were used, respectively.

The effects of the slab thickness and the geometry parameters of the holes on the bandgaps are discussed.

Parameters considered included composite effects of the slab and beam, the tie configuration in the panel zone, effects of the cross-beam, and the loading protocol.

The plane displacement interpolation functions of a quadrilateral isoparametric element with drilling degrees of freedom are employed to describe the membrane effects and the bending effects of the slab element are represented by the rotation functions of the slab element derived from Timoshenko's composite beam functions.

This difference is caused by the shielding effect of the Philippine Sea slab that directly overlies the Pacific slab (Hasegawa et al. 2007, 2009, 2016).

Large through-depth thermal gradients are created in the beam sections due to the heat sink effect of the concrete slab, with higher gradients produced by larger fires.