Sentence examples for eccentricity values from inspiring English sources

Such superiority is clearly noticeable for large eccentricity values.

However, singularities were observed for eccentricity values greater than 0.4.

It is shown that the maximum current in the transient is suppressed when hydrogen is evolved on hemispheroidal growth forms characterized by eccentricity values less than one, whereas it is accentuated for eccentricity values greater than one.

This effect was associated with a global increase in eccentricity values, which rose from 0.45 to 0.87 in 4 mg/mL collagen and from 0.46 to 0.65 in 6 mg/mL collagen (Fig. 3C,D).

In order to reduce the eccentricity values for the required insertion loss, the Taguchi method is first used to simplify the optimization problems of the injection molding process.

In the case of linear kinetics, the solutions of the lumped models agreed satisfactorily with the solutions of the distributed models for all eccentricity values investigated.

The eccentricity value increases from 0.19 at 4th day, when it was still considered as a spheroid (eccentricity < 0.8) to 0.84 at day 5th when it turned into a strand (eccentricity > 0.8).

Model solutions show that eccentricity increases as the overhang length increases and eccentricity value is affected by unit weight of materials which are used in overhangs.

Using these settings, ferrules with a 0.00055 mm mean eccentricity value can be obtained, and insertion losses were measured to verify the mathematical model.

For an eccentricity value of 0.7, the mass flux in the bottom most subchannel (l) was found to decrease by 10%, while the surface temperature of the fuel rod in the vicinity of this subchannel increased by 250% at the outlet section.

The eccentricity parameter values presented in Table 2 show that the higher the lower the eccentricity value is.