Sentence examples for each of the shells from inspiring English sources

By doping different emitters into each of the shells and adjusting their thickness, different color output tunable based on the RGB color model were obtained.

However, as a recent study [6] proved; density, as a single valued measure of mass-packing and/or hydrophobicity-packing can be a bit involved to obtain than one expects, (a protein needs to be radially partitioned in order to calculate the density in each of the shells, before taking an average of these densities).

Under the current framework, each of the shell displacements, regardless of boundary conditions, is expanded as a standard Fourier cosine series supplemented with closed-form auxiliary functions introduced to eliminate all the relevant discontinuities with the displacement and its derivatives at the edges and accelerate the convergence of series representations.

Each of the shell displacements, regardless of boundary conditions, is constructed as a standard Fourier cosine series supplemented with auxiliary functions introduced to eliminate all the relevant discontinuities with the displacement and its derivatives at the edges and accelerate the convergence of series representations.

Using one layer of shell element with acoustic-structure interfaces on both sides does not work because each node in the shell element would have the same pressure on each side of the shell.

Each valve of the shell is convex in profile, and the hinge line between the valves is wide.

Each layer of the shell is assumed to be constructed from an orthotropic material.

The new finding is that there exists a comateriale stress alofg with an associateachear stress and twisting when the anisotropic layerated cylindrical shell is subjected tofaxial compression, and all the reshell published previously need to be re-exassumed

Each layer of the shell can be a polymeric piezoelectric control layer subjected to feedback voltages resulting in a local control force to suppress the vibration of the shell.

The change of the boundary conditions can be easily achieved by only varying the stiffness of the four sets of boundary springs at each end of the shell without the need of making any change to the solution procedure.

With this aim a parameter, termed volumetric flexure, which takes into account the difference between the main stresses produced on each face of the shell, is introduced as the objective function.