Sentence examples for dynamic calibration of from inspiring English sources

A dynamic calibration of the sensors was performed and a total torque uncertainty was computed.

The hydraulic step wave generated by the HSC covered a range of dynamic calibration of hydraulic components that current hydraulic wave generators have not achieved yet.

Dynamic calibration of a Smagorinsky-type sub-grid scale (SGS) closure is employed to account for the unresolved stresses, whilst a stochastic Markov method is used to describe the effect of the SGS velocity fluctuations on bubble dispersion.

When combined with modulated-ion-energy gated trapping, the dynamic calibration of FTICR mass spectra provided decreased mass measurement errors for peptide identifications in conjunction with high resolution capillary LC separations over a dynamic range of peptide peak intensities for each spectrum of 103, and >105 for peptide abundances in the overall separation.

Dynamic calibration of camera.

First, dynamic calibration of the striker's load cell is performed within an accuracy of ±1.0%%.

Very good agreement in the static and dynamic calibrations of the estimator output is observed, when compared with a dial gauge and commercial eddy current probe.

This study demonstrated that the instrumentation problems can be resolved or avoided by appropriately selecting the force and motion sensors, improving the structure design of the instrumented handle and fixture, using the frequency-domain method for the handle mass cancellation, and conducting the static and dynamic calibrations of the measurement system using the proposed methods.

First, the devices of dynamic calibration for infrared thermometer sensor are designed and the calibration experiments with continuous excitation are carried out.

The dynamic calibration data of the uIRt/c sensor are used to test and the experiment results show that the stabilizing time of the sensor is reduced less than 6 ms from 26 ms and the dynamic characteristic is obviously improved after compensation.

Based on our testing, we recommend the following to minimize TBF error: (1) periodic checking of the static calibration volume (c) since c is a gauge-specific value which has been found to vary after field deployment; and (2) for dynamic calibration, the use of our newly derived generalized correction equation when the tipping rate is less than 0.2 Hz.