Sentence examples for dyeing solution from inspiring English sources

In the second method of dyeing named 'open bath' (without beaker), for the study of nodal/anti-nodal point of energy, 2 g of fabric was dyed with 2 g of dye at 60, 70, and 80 °C in 2 L of dyeing solution, pH of the bath was 4 and no beaker was used.

In this VICRAIZES demonstration system, besides the use of biogas for cooking demand at the family, the surplus biogas was used for heating the pan with dyeing solution, and by this way, greenhouse gases emission from surplus biogas and waste emission from burning pieces of sedge mats (for heating the dyeing pan) were both reduced or eliminated.

DyeCoo for example, claims to have created "the world's first water-free and process chemical-free dyeing solution".

The possibility of recovering water from hot dyeing solution has been investigated in this work by using membrane distillation (MD) made of polyvinylidene fluoride (PVDF).

Prior to the treatment of hot dyeing solution of 80 °C, the PVDF membranes were characterized in terms of scanning electron microscopy, atomic force microscopy, gas permeation, liquid entry pressure, contact angle and membrane porosity.

Although MD flux tended to decrease with increasing polymer concentration, all the resulting membranes were still able to achieve excellent dye rejection (at least 99.78%), indicating that MD is very potential to be employed in treating dyeing solution which normally discharged in hot condition from textile industry.

Colonies that had the high concentration dyed solution as an exclusive food source for several months exhibit normal death rates throughout this period.

The photocatalytic activity of the resulting TiO2 films was evaluated by the photodegradation of Rhodamine B (RhB) dye solution.

When excited at 780 nm, the dye solution produced a PA signal that was 2 times higher in amplitude compared to the blood, even after the dye solution was diluted by a factor of 100.

The dye solution migrated up the inserted material by capillary action, and the dye components produced bands of different colour.

We have identified the influence of fluorescent dye solution concentration and water/dye solution flow rate ratio on obtained product polydispersity, size, zeta potential, and fluorescence.