Sentence examples for due to insulation from inspiring English sources

Several troubles and systems' outages have been reported worldwide due to insulation failures.

Electrical insulation is often the weak link in magnet design, due to insulation sensitivity to high radiation doses, embrittlement at cryogenic temperatures, and fabrication limitations.

It is estimated that 50% of power transformers will survive 50 years of use, that the average age of failure of power transformers is about 10 to 15 years, and that about 30% of power transformer failures are due to insulation and overloading failures.

Riata ST Optim™ and Durata ICD leads have failed due to insulation abrasions.

However, in this study sleep disturbances were related neither to aircraft noise, possibly due to insulation of the most highly exposed residences, nor to any of the outcomes.

An abandoned lead is disconnected from the pulse generator, left behind due to fracture, insulation breaks, dislodgment or other failure.

Recently, condensation and mold problems in apartment buildings have been on the rise due to increased insulation and airtightness performance for energy savings.

The lower consumption of the house of 22.22 % difference with respect to the houses in the region [42] is due to good insulation, air tightness, energy efficient lighting and a new desiccant-based HVAC system.

These results show that brush anodes, combined with a glass fiber separator and a plastic mesh supporter, produce a useful MFC architecture that is inherently scalable due to good insulation between the electrodes and a compact architecture.

The lightweight concrete developed could be a suitable material for high-rise buildings, with a number of advantages: cost saving due to extra insulation not being required, more flexibility for architects and structural engineers when designing buildings, sustainability due to relatively easy maintenance, and easier recycling (Yu et al. 2015).

Micrometre-sized nanowire patterns (both Cu and Ag) were fabricated on glass substrates, using the procedure shown in Figure 2. Electrodeposition had selectively taken place on the exposed metal area (which act as pads), initially defined by the lithography, due to the insulation of photoresist.