Sentence examples for dual wire from inspiring English sources

Sadly enough, NEC was not willing to make a dual wire scanner as they invented and use it at MIRF.

The equipment is designed such that the thermal conductivity could be measured using both single wire sensor of different length and dual wire sensor.

Mak et al. [7] improved this method through their dual wire technique, in which glue and a microsphere are simultaneously applied to a cantilever using two micropipettes.

In additional contractility assays, 2 mm rings of aorta were mounted in a DMT dual wire myograph and maintained under the same conditions as described above.

Arterial segments (1.0 to 1.5 mm long) were mounted in a small vessel wire myograph (Dual Wire Myograph System 410A, DMT A/S, Aarhus, Denmark).

The arteries were then cut into segments (1.28 ± 0.04 mm long) and mounted as ring-shaped preparations in the Mulvany-Halpern style small vessel wire myograph chamber (Dual Wire Myograph System 410A, DMT A/S, Aarhus, Denmark) to determine the vascular reactivity during isometric conditions as described elsewhere [ 33].

The present study was designed to evaluate the safety and feasibility of transcatheter closure of perimembranous ventricular septal defects (PmVSDs) with dual wire-maintaining technique (DWMT).

A state-of-the-art instrument for two-phase flow measurements based on the fluid conductivity, namely dual Wire-Mesh Sensor (WMS) has been utilized to acquire the experimental data.

Analysis of time series void fraction data from the dual Wire-Mesh Sensors allows the determination of cross-sectional averaged void fraction, local time averaged void fraction distribution, liquid phase distribution around the tube periphery, interfacial structure frequencies, pseudo 3D reconstruction as well as Probability Density Function (PDF) and Power Spectral Density (PSD).

When compared to single wires, the thermal conductivity of the fluids measured is consistent with dual-wire method with an uncertainty of ±0.25%.

The thermal conductivity is also measured using a dual hot wire arrangement; which is achieved by placing the 100 mm and 50 mm wires in a Wheatstone bridge with the 100 mm wire as the sensor and 50 mm wire as a compensation wire.