Sentence examples for dry thickness from inspiring English sources

A dry thickness of 2 nm corresponds to a swollen ≈6-nm-thick brush layer in aqueous solution, as measured by liquid AFM.

The dry thickness of the film layer was 19.6 μm and that of the sponge layer was controlled at 60 80 μm.

Planar collagen membranes (CMs) of 0.1 5.3 μm dry thickness were made by variation of the collagen concentration and/or the volume of the hydrogel.

A total of 14 laboratory-scale DoE formulations were prepared and evaluated for mechanical properties (%elongation at break, yield stress, Young's modulus, folding endurance) and other CQA (dry thickness, disintegration time, dissolution rate, moisture content, moisture uptake, drug assay and drug content uniformity).

High-build coatings consist of materials with a dry thickness greater than 10 mils (0.25 mm) and less than 30 mils (0.75 mm) and are applied to the surface of the concrete.

Artists paints, Golden Heavy Body Acrylics Hansa Yellow Light and Talens Rembrandt Azo Yellow Lemon, both containing PY3 azo yellow organic synthetic pigment, were applied to a triple primed canvas with a draw-down technique on a Sheen Instruments film caster, to a wet thickness of approximately 800 μm and dry thickness of 200 – 250 μm, as measured with a digital caliper.

Specular reflectivity data indicate the ''native'' dry oxide thickness is approximately 5 Å with a 1‐Å vacuum interface width.

Dry layer thickness of the polymer brushes was controlled by polymerization time and/or initiator density on the surface.

Results show energy propagation rates increased as a function of dry film thickness, although calorific output remained relatively constant.

The maximum dry brush thickness was used to estimate the average molecular weight of the polymer chains.

The edge coverage, as the ratio between dry film thickness at edge and at flat surface, is estimated based on high-resolution microscope inspections on polished cross-sections.