Sentence examples for dry pressing from inspiring English sources

Xia, C. & Liu, M. Low-temperature SOFCs based on Gd0.1Ce0.9O1.95 fabricated by dry pressing.

The separately designed ceramics samples were shaped by dry pressing at 25 MPa, and then fired at 960 and 1050 °C following exposures to freezing/thawing cycles.

A Four polar anisotropic sintered NdFeB PM with high surface flux density was developed using dry pressing process with pulse magnetizing fields.

Thick-film substrates are made by tape-casting processes (primarily doctor blading) to thicknesses of less than 1.5 millimetres, or they are made by dry pressing at thicknesses greater than 1.5 millimetres.

The manufacturing of low cost ceramic flat and tubular membranes via dry pressing and extrusion, using low cost material, namely, natural kaolin, Alumina, and lignite as a pore forming agent was the purpose in this study.

According to performance demands of tool materials for high speed machining difficult to cut materials, gradient cermet composite tool materials were designed and fabricated based on hot pressing sintering after dry pressing.

The fired bricks processed by the gelcasting technique exhibited superior properties in comparison with those processed by the semi-dry pressing process.

They were processed by gelcasting technique and compared with those prepared by semi-dry pressing process and the commercially used fusion casted ones.

Fired clay bricks lightened by adding up to 35 wt.% waste marble powder have been produced by semi-dry pressing process.

Pore collapse is a well-established outcome of drying delignified plant cell walls; therefore, pore properties are a strong function of biomass history (drying, pressing, storage).

The effect of certain parameters drying temperature, drying time, pressing time and pressure were analysed through Design of Experiment methodology.