However, samples that were dry sieved achieved far higher absolute dissolution rates than those that were wet sieved (Fig. 4), even though the dry sieved samples were nominally sieved to a narrower particle size range (63 75 μm vs. 44 75 μm for wet sieved samples).
However, cell densities of more than 100 g l−1 cell dry weight, achieved with Chlorella, Crypthecodinium and Galdieria species, highlight the potential of heterotrophic microalgal processes (de Swaaf et al. 2003c; Doucha and Lívanský 2011; Graverholt and Eriksen 2007; Wu and Shi 2007).
Controlled storage conditions without drying were achieved using the same matrices, but the matrices were kept in air above water leading to 100% RH in the air-phase.
After the solid residue was washed, drying was achieved at 60 °C overnight using the method described by Fan et al. (1980).
Isothermal drying was achieved in this study by evaporation from a thin film of syrup on a heated plate kept at 40 °C and 58 °C.
During the first 2 hours, the drying rate achieved with the forensiX tubes was 0.68%/min for nylon flocked swabs and 0.60%/min for cotton swabs.
Solar drying is achieved by direct sun radiation on the material covering the solar dryer, reaching internally higher temperatures, and similar or slightly lower humidity as the outside environment.
This also allowed us to calculate the encapsulation efficiency (EE) for PLGem as follows: (2) EE = mass encapsulated Gemcitabine / mass starting material Gemcitabine X 100 Samples were deposited onto a carbon membrane supported by a copper grid and left until complete drying was achieved.
Her prose is clipped and dry; it achieves a kind of deceptive primness even as it sneaks around behind to clock you on the head.
In the treated group, skin moisturization improved, with dry skin achieving a moisturized condition (P = 0.001), while placebo subjects did not show improved moisturization, and remained significantly less moisturized (P = 0.001, Figure 3A) than the treated group.
