Sentence examples for drop hydraulic from inspiring English sources
The six feed spacers were ranked on pressure drop (hydraulic characterization) and on biofouling impact (biofouling studies).
In Fig. 26a and b, only pressure drop in hydraulic fracture can be seen.
Current relationships for determination of the pressure drop with hydraulic transport through pipelines are not valid for all ranges of particle size, tube diameter or concentration.
Magnetohydrodynamic (MHD) pressure drop, thermal-hydraulic and stress analyses and numerical simulation are carried out for pressure, temperature and stress considerations.
In this paper we study the pressure drop in a hydraulic fracture after shut-in of a water injection well.
The pressure difference between the accumulator and reservoir is equal to the pressure drop on the hydraulic motor and pipelines Delta p={p}_a-{p}_r-operatorname{sgn}left({alpha}_0right) Delta {p}_p.
The forging die used in a hot forming operation on a hydraulic drop hammer is often exposed to high thermal and mechanical loadings where the service life of the die insert is mainly limited by wear and surface cracking.
The subsurface dam was able to retain the saltwater wedge associated with a drop of the hydraulic gradient from 0.0158 down to 0.0095 in all the cases, thereby achieving up to 78% reduction in the saltwater toe length.
It is known from the experience of development of reactor units of different types that it is practically not feasible to select the channel to serve as the imitator with simple geometry for which the dependence of pressure drop due to hydraulic losses would be the same as the dependence for full-scale operating fuel channel containing fuel assemblies.
Hydrogeological conditions at the Dongzhuang Hydro-Junction site are complex and include underground water divides, a hanging river and hydraulic drops along faults.
Effects of different operating parameters such as heater heat flux, mass fraction of nanoparticles and peristaltic flow rate on the overall heat transfer coefficient, value of the pressure drop and thermo-hydraulic performance index of the microchannel were experimentally investigated.
