Sentence examples for drop augmentations from inspiring English sources

Heat transfer enhancements (HTE) of the newly devised spiky ribbed twisted-tapes with and without edge notches are experimentally studied along with the associated pressure drop augmentations and transmitted efficiencies for heat convection.

Relative heat transfer enhancements (HTE) and pressure drop augmentations for present HTE element are disclosed by comparing the Nu and f data measured from the wavy channels with and without wavy ribs, as well as the straight two-pass channels with V- or W-ribs.

With references to the Nusselt numbers (Nu∞) and pressure drop coefficients (f∞) of smooth plain tube, the area-averaged heat transfer enhancement (HTE) ratios, pressure drop augmentations (f/f∞) and TPF for the tested undulant channel are compared with those obtained from other passive HTE devices.

The main aim of this study was to identify the optimum design parameters for the maximum heat transfer enhancement with the minimum pressure drop augmentation.

To evaluate the amount of heat transfer enhancement against pressure drop augmentation, a thermal-hydraulic performance evaluation parameter has been applied, and it is found that the vortex rod with d∗ = 0.058 and α = 57.057° at Re = 426.767 gives the best thermal-hydraulic performance.

To have a comparison between the heat transfer enhancement and pressure drop augmentation with nanoparticle concentration detail analysis of the corresponding data in the case of Re = 300 and Ri = 5, is presented as an example.

Fagin has asked whether it is possible to reduce the power of the complementation rule and drop the augmentation rule at the same time and still obtain a complete set.

Although regenerator effectiveness can be improved considerably by manipulating the design factors, care must be taken to avoid unjustified expenses resulted from potential augmentation in pressure drop.

Furthermore, the effects of the four design variables on heat transfer augmentation and pressure drop penalty are investigated depending on different Reynolds numbers by using the simulated annealing method.

Sahin et al. (2013) studied the convective heat transfer, the pressure drop characteristics and heat transfer augmentation of water based nanofluid with volume concentration of 0.5%, 1%, 2% and 4% inside a circular tube in the turbulent flow regime.

The number of breast augmentations performed in the U.S. dropped to 32,000 by 1992 from a high of at least 120,000 two years before, according to the American Society of Plastic and Reconstructive Surgeons.