The phrase "driven gear" is correct and usable in written English.
It can be used in contexts related to mechanics or machinery, specifically when discussing components that are driven by another part.
Example: "The driven gear rotates in response to the motion of the driving gear, allowing the machine to function properly."
Alternatives: "driven cog" or "driven wheel".
Having a sound appreciation of magnetically driven gear pump technology should be a pre-requisite when considering its use in a fluid system.
An internal gear pump is shown in Figure 2. The driven gear is a rotor with internally cut teeth, which mesh with the teeth of an externally cut idler gear, set off-centre from the rotor.
ω1 and ω2 denote the rotational speed of the driving and driven gear.
rb1 and rb2 refer to the radius of base circle of driving and driven gear.
The basic parameters of driving and driven gear are given in Table 1.
The third speed gears Constant meshing gears Driving gear Driven gear Driving gear Driven gear Number of teeth 25 27 24 32 Rotating period (s) 0.05 0.054 0.04 0.03 Rotating frequency (Hz) 20 18.5 25 33.3 Meshing frequency (Hz) 500 640.
Each caisson was separately counterbalanced by a series of weights and ropes with electrically driven gearing.
In this paper, a double envelope concept is used to determine the basic profile of an internal gear with asymmetric involute teeth including driving and driven gears.
The dynamic transmission error between driving and driven gears of a gear mechanism with torsional mode is induced by periodic time-varying mesh stiffness.
The sneakiness, the avidity, the robotic look that undoes careful pre-debate coaching all mesh together like driven gears in her mobile face.
The elastic ropes are fixed between the driven gears and the base: one side of the elastic rope is fixed on the base, while the other side is fixed on the driven gear by passing the sliding tubes.
