Sentence examples for drilling indicated from inspiring English sources

The seven-company consortium, which is led by Eni of Italy, said initial drilling indicated an oil flow rate of 2,300 barrels a day.

We continued with the drilling indicated by the manufacturer, to insert two white SKY (Bredent®) zirconia implants of 10 mm length × 4.5 mm diameter in positions 17 and 16 (8 mm length × 4 mm diameter) (Fig. 2).

Borehole resistivity images obtained from logging while drilling indicate the presence of multiple conductive fractures in the megasplay fault zone, which may inhibit core recovery (Kinoshita et al. 2009).

Field drilling application indicated that the ROP of the new bit was approximately three to four times that of the bits produced by other factories.

The comparison of CrTiAlN and TiN coated drills as well as bare drill indicates that besides appreciable hardness, thermal stability is a crucial factor.

The sight of workers jamming red sticks into drilled schist indicated that it was time to beat a retreat to the Thunderdome.

Different from the Huangliu Formation axial channel sandstone, drilling results indicate that the heavy mineral assemblages of the Meishan Formation in the Ledong and Lingshui sags display the magmatic components characteristics.

The laboratory drilling test indicated that both the manufacturing technology and the drilling parameters significantly affect the rate of penetration (ROP).

On the contrary, the results of the incremental hole drilling tests indicated that the through-thickness residual stress distributions are not uniform and are characterized by the presence of tensile peak stresses, at depths in the range of ~ 50 125 μm.

Initial results from the drilling project indicated that reflections of seismic waves that were commonly observed in geophysical surveys of the oceanic crust were largely unrelated to the boundaries between fundamental types of rock (such as the basalt-gabbro boundary) but instead were caused by changes in such characteristics as the porosity of rock materials.

Drilling experiments indicate that the drilling loads calculated by the proposed model match well the experimental results.