Sentence examples for drill switch from inspiring English sources

Replace the drill switch cover, tightening all of its fasteners snugly.

This can be done by connecting the test leads to the prong on each side and the terminal at the drill's switch.

Remove the drill's switch cover so you can test the wires and motor after you have completed the previous steps.

The effects of the shutdown over the weekend were relatively limited: halting trash pickup on National Park Service property, canceling military reservists' drill plans, switching off some government employees' cellphones.

Make sure the drill is switched to the off position before plugging it in, then plug it in and turn it onto the lowest setting.

The team will switch drill bits from the large one that takes ice cores as it goes to a smaller one only a few centimetres in diameter, which will melt its way down using a sterile silicone fluid.

Once you've drilled a small hole into the pot, switch the drill bit for one that is 1/8 inch (3.175 mm) larger.

Set the speed of the drill and lock the switch in the on position, and begin to remove material slowly from the stock with a 4 inch (10.2 cm) sander/grinder, or a piece of very coarse sandpaper on a sanding block.

Manuel has raved about how quickly Reyes has taken to the 80-pitch drill, which, for a switch-hitter, turns out to be 160 pitches.

Tells about a dentist who can use either hand, he stands in front of his patient and switches the drill from one hand to the other.

The shelves are still jammed with nails, drills and light switches, but Home Depot is displaying a growing willingness to stray from the single-minded focus on kitchen renovations and roof repair that turned the chain into the nation's second-largest retailer, after Wal-Mart.