Sentence examples for dominating failure modes from inspiring English sources
Matrix fracture and fiber pull-out, as well as fiber-matrix interfacial debonding are the dominating failure modes of CFABS specimen.
Three dominating failure modes were observed, namely, local buckling of steel plates (LB), severe cracking ('tearing') of the weld along the corner line of the wall (WC), and global instability (GI).
It was found by the authors in their previous research on SRC beams under fatigue loading that flexural fatigue failure was the dominating failure mode when a large shear span-to-beam depth ratio of 2.63 was used.
Tear-up or edge-splitting dominates failure modes at the bolted connections.
Focusing on matrix dominated failure modes, the damage behavior is split into two contributions, damage evolution and damage effect.
The strength and dominated failure modes of the braided composites obtained by the FFT-based method are also verified by the experimental results.
Interfacial shear failure, cohesive failure and CNTs pull-out are the dominated failure modes in the SAJs, whereas bearing, shear-out, longitudinal splitting and bolt fracture are observed for the bolted joints.
Test results showed considerable linearity before the maximum load point both under pure mode III and mixed-mode III/II; also, failure examination indicated that dominate failure under tearing mode was adhesive/adherend interface, which will be discussed in detail.
The results show that the classical yield-line modes dominate failure patterns of masonry walls subjected to vented gas explosions and the dynamic responses of masonry walls are determined by the peak value of overpressure.
In addition, it is found that the inelastic LTB dominates the failure mode for higher spans of HTFPGs compared to equivalent IPGs.
