Sentence examples for dominant electrical from inspiring English sources

The Altiplano conductor is again the dominant electrical feature in the Central Andes, indicating widespread melting of the middle and lower back-arc crust.

Larger number cells in circular muscle produce dominant electrical signal, and because of tight connections between cells by ICC-IM, simultaneous excitation of circular muscle produces larger electrical signals than that produced by longitudinal muscle.

His first venture, in 1891, was to arrange the merger of Edison General Electric and Thomson-Houston Electric Company to form General Electric, which became the dominant electrical-equipment manufacturing firm in the United States.

The model provides an "inner" solution for the wall layer, which reflects the dominant balance between electrical forces and viscous forces (tangentially), respectively between electrical forces and pressure and viscous forces (normally).

The dominant mechanism of electrical conduction is electron tunneling between the nanoparticles through the polymer film boundary [255].

For the fabricated SMNWs, we assume the dominant mechanism of electrical conductivity is a mixture of hopping and tunneling, depending on the different structure of ZnO NP entrapment in Figures 3 and 4. The dispersed ZnO NPs are spaced less than 10 nm apart, indicating that tunneling may be dominant - especially at higher applied electric fields as shown in Figure 3c.

According to the theoretical analysis as well as the numerical simulation, the average intersection number on each CNT is revealed as the only dominant factor for the electrical percolation and the stiffness thresholds, it is approximately 3.7 for electrical percolation threshold, and 5.2 for the stiffness threshold of 2D networks.

Adhesive wear, abrasive wear and arc erosion were the dominant mechanisms during the electrical sliding.

Contact resistance between particles is the dominant part of the electrical resistance of the magnetite electrode.

It was found that bending fatigue is the dominant factor to the electrical failure of ITO thin film.

Furthermore, the analysis of variance (ANOVA) is determined to define the process parameters which have a dominant effect on the electrical and optical properties of ITO films.