Your English writing platform
Discover LudwigExact(6)
Therefore, only a small amount of steam is fed to the first district heater.
If the steam extraction for the high-pressure district heater could have been increased, the heat extraction and the power loss would have been higher.
The steep drop is due to a load shift from the first to the second district heater, if the heat extraction is increased from 160 to 225 MW.
The success of the bioenergy village project is dependent on the majority of the village households deciding to get their heating energy from the district heater via the pipeline.
If only two district heaters are installed, the one with the highest extraction pressure is neglected and in case of one district heater only the intermediate one is considered.
However, the installation of multiple heating exchangers offers the opportunity to satisfy low-temperature heat demands only with the low pressure district heater(s), so that no steam has to be extracted from one of the high pressure extractions for this purpose.
Similar(54)
It uses a typical German condensing temperature and a factor depending on the number of district heaters.
The influence of the steam extraction rate on the exergy destruction in the district heaters is part of [17].
The CHP plant with three district heaters is presented, but similar models were analyzed with one and two district heaters as well.7 This basic example is used to analyze the influence of the number of heating condensers but also shows the influence of the energetic losses (here referred to as flue gas losses) for CCPPs.
In difference to the Dresdner method, the approach described in this work is flexible regarding the cooling water temperature, considers the influence of the district heating return temperature and is independent of the number of district heaters.
A pressure control flap is installed in the overflow steam line from the IP to the LP turbine, which is often used to control the condensing temperature in the district heaters.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com