Sentence examples for dissolution of the sample from inspiring English sources

The efficiency of oxidation falls and anodic dissolution of the sample begins as the temperature decreases.

The electrochemical measurements showed that the dissolution of the sample proceeded in the transpassive regime at overvoltages above 300 mV.

Complete dissolution of the sample was observed and measured using standard reference materials (SRMs) and experimental data show no evidence of cross-contamination of crucibles when LiBO2/LiBr melts were used.

Current potential curves recorded, when electrolyte and binder are 1 M aqueous solutions of strong mineral acids, evidence only the reduction of chromium (VI) ions resulting from the more or less complete dissolution of the sample at the beginning of the experiment.

After the complete dissolution of the sample, diazomethane in diethyl ether solution was added till the solution turned deep yellow for the excess of diazomethane.

This change in the particle size distribution could be produced by nanoparticle aggregation during the nanofluid drying and solidification process and time in liquid state (the sample has been measured previously by DSC), but not during the dissolution of the sample in water and first measurements, since these processes take few seconds.

Measurements were made on an ICP-OES Vista-Pro (Varian), after dissolution of the samples in a HNO3:HF:H2O mixture.

Quantitative determination of metal levels in serum and tissue samples was performed after the dissolution of the samples.

2D NMR shows detailed bonding structures, however, the dissolution of the samples in the solvent mixture was not complete, and may not be a representative fraction of the whole solid residue.

The dissolution of this sample left a porous skeleton of more passivated Ni.

The anodic dissolution of this sample was controlled by two competing processes: breakdown and formation of the passive layer.