Sentence examples for dissimilar materials of from inspiring English sources

When dissimilar materials of widely varying properties are combined, the interfacial regions are invariably defective and typically, the location where failure initiates.

A novel resistance spot welding method of dissimilar materials of 6008-T66 alloynium andoy and H220YD galvanised high strength steel was presented, and the morphology of welding electrodes was designed optimally.

In this present investigation, Friction welding is carried out to weld two dissimilar materials of SA 213 tube to SA 387 tube plate using an external tungsten carbide tool to enhance and validate the mechanical and metallurgical properties.

The ultimate tensile test strength (UTS) result, given in Figure 3, showed that the UTS of welds with dissimilar materials of strain hardened alloys of the 5xxx series (EN AC-AlMg9 according to EN 573-3) does not depend significantly on the travel speed and the plate thickness of the material.

This work presents results of vibration welding of dissimilar materials joints made of nylon 66 (Pand) and 30% glass fibres nylon 66 (PA66 GF30).

In order to determine weld quality of plug-welded dissimilar materials, the strength of weldment was also determined.

While metal bonded joints generally fail at the adhesive, the final failure mode of all the tested bonded joints with dissimilar materials was delamination of the composite adherend.

Heterogeneous perforated panels represent a wide class of structural elements with holes where perforations and matrix are of dissimilar materials e.g. metallic member of a perforated hybrid joint with resin-fillings.

Tough and reliable bonding between dissimilar materials is one of the most important and challenging topics in the fields of adhesion and adhesives because metal components used for automobiles, aircrafts, and mechanical parts have increasingly been replaced by lightweight plastics and polymer composites during recent years [1, 2].

The proposed method is adopted to estimate the adhesions of several concerned interfaces of dissimilar materials bonded with glue through the index of energy release rates.

Due to the occurrence of dissimilar materials and the abrupt change of cross-section, the stress distribution at plate ends becomes singular and is hence considerably complicated.