Sentence examples for displacements in three from inspiring English sources
The plate and the stiffeners have displacements in three dimensions.
The ice load on each model leg, structural displacements in three directions, and foundation reactions in two directions were measured during the tests.
Accuracy and repeatability of the system was evaluated using a wedge comparator with a resolution of 0.25 μm to provide measured marker displacements in three orthogonal directions.
Wearing a bra obviously reduced breast displacements in three directions, bra C with an additional layer of the cup pad further slightly reduced the displacements while increasing pressure by about 0.2 kPa.
There are four nodal unknowns at each node, i.e., incremental displacements in three directions of the Cartesian coordinate system and incremental pore pressure.
Tumor deformation (TD) between the end-inspiration (T5%) and the end-inspiration (T55%) from 4D-CT data was also calculated using the average of displacements in three directions: the anterior-posterior (AP), lateral (LAT), and superior-inferior (SI) [ 22].
The form of the 2D GSFE function (displacements in two orthogonal directions in the (0001) plane) must respect the symmetry of the graphite crystal structure44,45.
The red and green arrows represent the displacements in two independent directions governed by two parameters, and therefore span an orange area, and these ideas are expressed just naturally by the colored texts.
The building is modeled as a structure composed of members connected by rigid floor diaphragms with three degrees of freedom at each story; i.e. lateral displacements in two perpendicular directions and a rotation with respect to a vertical axis.
Three-dimensional modeling of the building is considered where three degrees of freedom including displacements in two perpendicular horizontal directions and rotation about the vertical axis are corresponded to each floor.
The building is modeled as a structure composed of members connected by a rigid floor diaphragm such that it has three degrees of freedom at each floor, i.e., lateral displacements in two perpendicular directions and a rotation with respect to a vertical axis for the third dimension.
