Sentence examples for displacement while the from inspiring English sources

First half covers explanations about the mechanisms and drivers of displacement, while the second half introduces and evaluates policy and legal responses developed by many actors.

Persistent currents are stored in the two circuits such that one SQUID is only coupled to the differential displacement while the other only senses the common one.

It turns out that the length of the partial constrained viscoelastic layer damping has the most important effect on the initial transient displacement while the viscoelastic layer thickness has little effect.

Consideration of non-linearity is found to be indispensable in the case of earthquake excitation, with a low dominant frequency, since the non-linear analysis leads to positive values of the mean responses of the liquid surface and wall displacement, while the linearized theory predicts zero mean response.

The 3.5-mm plate displays a more linear trend of displacement, while the 4.5-mm plate displays a more erratic one.

The asymmetry of the radial displacement is due to the fact that the region of the upper bending stress (see Fig. 19) is relieved because of the progressive radial displacement, while the lower region is additionally stressed.

Next, a reinforcement learning agent transforms these paths into trajectories that maintain the bound on the load displacement while following the collision-free path in a timely manner.

The microstructure of the FGM biomorph actuator is optimized by using CLT model to achieve the best performance of the FGM piezoelectric actuator, i.e. large bending displacement while minimizing the induced stress field.

Unfortunately, the ability to determine blue shark location while in the Gulf Stream was not sufficiently precise for the model to account for spatial variations in their displacement while in the Stream.

Second, the SPCL is more effective for large displacements, while the SQDCL is more advantageous for very small displacements.

The results show that local buckling occurs more easily under smaller fault displacements, while the tensile failure tends to occur under larger fault displacements.