Sentence examples for displacement control for from inspiring English sources

Selected test data comparing load and displacement control for the cyclic fatigue tests are also discussed.

It's more economical and effective to adopt the scheme of increasing pile diameter than the scheme of narrowing pile spacing when there's a high requirement for displacement control of side piles.

A displacement control design for isolation layers subjected to BDBE shaking, which adopts fluid dampers for controlling the horizontal displacement of isolation layer is developed.

In this study, numerical results are presented for the shape control of the FGM plates under a temperature gradient by optimizing (i) the voltage distribution for the open loop control, and (ii) the displacement control gain values for the closed loop feedback control.

Additionally, the initial crack length required to produce a stable crack growth under displacement control is studied for various material orthotropies.

This loading method was selected for consistency with the experimental procedure in which the test specimens were loaded under displacement control, as well as for convergence issues.

For displacement control, when there is phase-lag in the system, it is desirable to have high damping, and this is also the case for acceleration feedback when there is phase-lead.

A four-point single-edge-notch-beam (SENB) test specimen loaded in displacement control (fixed grip) is proposed for studying crack deflection at bi-material interfaces.

This research resulted in the development of a new method for performing displacement control analysis of distributed loads to obtain the ultimate shear strength of structural components.

For unilateral displacement control, snaps may occur at points where the associated downward force decreases to zero, at turning points (which have a vertical tangent), and at bifurcation points (if the bifurcating path moves downward at the loaded joint).

All the stiffness matrices are adopted in the incremental-iterative analysis using the generalized displacement control (GDC) method, with specific considerations for the predictor and corrector phases.