Sentence examples for displacement condition from inspiring English sources

At zero displacement condition when all 37 connecting bolts were constraint, natural frequency reaches in a higher order range of 1650.5 3565.1 Hz.

The slab is subjected to a pressure pulse on one surface and a vanishing stress or displacement condition on the other.

In this paper, the coupling techniques for the traction (i.e., Neumann condition) are the main theme for boundary methods, because the traction condition may be regarded as the basic condition and the displacement condition as the natural condition.

Afterwards, in the first construction step, the nodal displacement, displacement condition and the tangent stiffness matrix are built, and the finite element equations are calculated based on the existing members using the geometric nonlinear finite element method (FEM).

In the subsequent construction stages, the nodal displacement, displacement condition and the tangent stiffness matrix are modified based on the newly added members and the friction of the cable strut joints in present stage.

Compared with the experimental data, the errors of the model predictions are about ±2% for the volumetric displacement, less than 3% for the input power at full load condition, about 4% for the input power at part-load displacement condition, and about 2% and less than 4% for vapor injection mass flowrate.

A bending specimen that gives a constant energy release rate (independent on the crack length) under controlled displacement conditions is developed.

Under the same displacement conditions, the inverse procedure estimations of the callus material properties are generated and compared to other fracture healing metrics.

Before mixed mode failure, the quasi-analytical calculations obtained by a specific elastic model match experimental results under static and controlled displacement conditions.

This paper describes a mathematical programing based approach for the direct limit load evaluation of a structural system under simultaneous contact and limited displacement conditions.

The evolution of the configuration of the residual phase, the pressure drop across the micromodel and the concentration of the effluent are continuously recorded under various displacement conditions.