Sentence examples for discrete cooling from inspiring English sources

In these procedures patients are awake, and if the microelectrode is positioned inferior and posterior to the main somatosensory nucleus, microstimulation elicits immediate patient descriptions of discrete cooling, warming, or pain sensations localized to a particular part of the body.

The second step illustrates the transition from cooling surface to discrete cooling channels, based on the analysis of the isothermal surfaces in the mould.

This paper reviews recent constructal-theory advances: the optimal distribution of discrete heat sources cooled by laminar natural convection.

The ion source uses a discrete superconducting magnet cooled by a closed-cycle refrigerator in order to reduce the running costs and to simplify the operating procedures.

The proposed combined continuous and discrete CA cool storage simulation model was able to represent the step response transients and continuous events, with accuracy less than the observed variability or at best with accuracy level as set by the measurement instrument.

Discrete guide vanes have been suggested to control the cooling effect on tip surfaces.

A numerical study is performed for the time-dependent laminar natural convection air cooling in a vertical rectangular enclosure with three discrete flush-mounted heaters.

A new chiller sizing method is proposed in this paper taking into account the scenario parameter uncertainty, the discrete spectrum of nominal cooling capacity of available chillers, the difference of chiller cooling capacity under nominal condition and peak cooling load condition.

In the present study, an experimental investigation was conducted to explore a novel film cooling design with Barchan-dune-shaped-ramp (BDSR) concept to augment the effectiveness of film cooling injection from discrete holes.

Frequency spectra were acquired at discrete temperatures above and below the ODT, while isochronal temperature sweeps were performed at ω = 1 rad/s and a cooling rate of 1°C/min under a nitrogen purge to avoid oxidative degradation.

Two discrete variables are related to system configuration: number of chillers and number of cooling towers and three continuous variables are related to system design: building load demand, temperature difference across condenser, and cooling tower fan speed.