Sentence examples for disc sample from inspiring English sources

Annealing of a mechanically polished disc sample to 600 °C for 14 h in UHV resulted in a fourfold surface enrichment of zirconium.

A strong influence of the supporting rod for the fluence distribution on the backside of the low symmetry samples, i.e. square and rectangle was observed, in contrast to no influence for the disc sample.

Unlubricated wear tests have been performed with a ball-on-disc tribometer, in which, a disc sample of gamma-based titanium aluminide (TiAl) was sliding against an 8 mm diameter ball made of steel and ceramics of Al2O3, Si3N4 and WC/Co.

Relative height of each disc sample was then calculated as disc height divided by predicted total tree height.

Each estimation of the mean is based on bootstrapping data from one disc sample.

Cells were seeded onto the disc sample surfaces at 40,000 cells/cm concentration and incubated at 37°C in a humidified atmosphere with 5% CO2.

Three point bending and compression experiments were performed on beam and circular disc samples respectively to determine the 'apparent' stress-strain curves in bending and compression.

In this study, CoCrMo alloy disc samples and resurfacing cups with various surface conditions were immersion tested in serum solution for up to 1200 h.

The thermal diffusivity of slate has been measured on disc samples of 6 mm in diameter and 2.25 to 2.45 mm in thickness by the laser flash method.

Upon the completion of this work, it was observed that the onset of micropitting damage was affected by the hardness of the asperities on the mated roller and disc samples.

Here, we report design and fabrication of an apparatus that allows Seebeck measurement by 2-probe method concurrently with electrical resistivity by 4-probe method of bar and disc samples in the temperature range from 300 to 1000 K.