Sentence examples for directions width from inspiring English sources

The black square mark corresponds to the aspect ratio of the hole width at half hole height (see inset Fig. 1e) in the two main directions (width in [1 10] divided by the width in [110]), and red triangles are for the depth of the holes (as marked in the inset of Fig. 1e).

For interclass comparison, the distance (dpulp) and the lesion extension in all three directions (width, depth and height) as well as the area of all visible lesions in the 3D UTE images were compared.

The change in the position in the z-axis direction (width direction from the tilting robot) at this time is considered to be small, and hence was omitted from the measurement.

The dimensions of the hydraulically fractured region are 5 fractures with half-length of 350 ft in J direction, width 0.001 ft in I direction, and fracture height of 42 ft in K direction.

Fluid models are three-dimensional because the lymph fluid moves not only in the radial direction (width direction of the BM) and transversal direction (perpendicular to the BM) but also in the longitudinal direction.

We simulated a range of steps that were larger than the pipet radius in both the x direction (width = 50 ri) and the y direction (breadth =30 ri). Figure 2C E shows simulations for steps of this type of height 1 ri, 5 ri, and 10 ri.

In the earlier stage, the recovery of length (machine direction) and width (transverse direction) appears to take place in parallel so that the rate constant of area recovery can be approximated as the sum of those of the length and width recoveries.

The aperture between the two parallel plates in the model had 300 lattices in the X direction (flow direction) and 100 in the Y direction (aperture width), with a number that varied between 10 and 30 in the Z direction (aperture thickness direction).

The thickness homogeneity along the length direction (not the width direction) is very good for the studied samples.

The criterion also shows that the final failure of angle-ply laminates exhibits size effects both in the thickness direction and the width direction.

This test development start from the idea that in some cases it could be advantageous to orientate the parcels differently, not in the direction of length but in the direction of width (Fig. 6), so with a 90° rotation.