In addition, Young's modulus of the 3D RF material in the TTT and IP directions decreases with the temperature.
Morphological parameter in both directions decreases or equiaxed grains readily occur, for example, if the face radius and truncated length of the electrode increase.
Regardless of testing directions and oxidation treatment, the thermal diffusivities and conductivities of SiC multilayer in three directions decreased with the increase of temperature.
The results also demonstrate that restriction of growth along 〈1 0 0〉 directions decreases the magnitude of the temperature gradient and increases the growth rate along the dendrite growth direction (relative to the solidification interface normal).
The maximum anisotropy ratio of (overline{P_{ii}}) between different directions decreases as the number of insulation layers for the z-direction increases: 2.11 (L3), 1.81 (L6), and 1.62 (L9).
At the contralateral side), the phase of the experimental results for the x and y directions decreased more rapidly than the simulation results above 1 kHz.
Since the effect of the deletion or constitutive activation of GNA1 does not point in different directions (decreased biomass formation in both cases) in light, it most likely involves the function of the Gβ subunit.
Also, as the body is positioned closer to the structure, the non-dimensional RMS forces in the horizontal direction decrease, and the non-dimensional RMS forces in the vertical direction increase.
It can be found that fiber diameter, pore diameter, porosity, stress and strain along length direction decrease while alignment degree and apparent contact angle have no obvious change as the increasing of DCD.
The study reveals significant shift in corrosion potential towards the noble direction, decrease in corrosion current density, increase in charge transfer resistance and decrease in double‐layer capacitance values with the incorporation of PCTFE particles in the Ni-P matrix.
