Sentence examples for direction of the model from inspiring English sources

First, the overhanging points on the part surface are identified using the normal vector direction of the model surface.

The angle between the upstream velocity and the direction of the model varies from 0° and 30°.

A uniaxial compression was applied along the axial direction of the model and the model was subjected to a linear elastic analysis to determine the bone stiffness.

At both sides, the magnitude of the acceleration in the x direction (a x ; medial-lateral direction) of the model was similar to that reported in the experimental study.

On the other hand, the magnitude of the a y (anterior-posterior direction) and the a z (inferior-superior direction) of the model showed larger discrepancies with those of the experiment.

Despite the differences in cost estimates of the key cost parameters (drug costs and toxicity costs), the direction of the models was consistent in the base case, with the exception of the costs of chemotherapy infusion, which were lower for PCB in the Japan model while higher for PCB in the US model.

Seismic motion was applied sequentially in the x, y, and x + y directions of the model, and the peak ground acceleration (PGA) was increased gradually to 0.07, 0.1, 0.22, 0.4 and 0.9 g.

The weld contact method is used when the main and subsequent contact areas are attached to one another from the initial stage; it does not allow the two surfaces to be detached during the analysis so that the load is delivered in the direction of the normal and contact directions of the model.

The x, y, and z directions of the model (rectangular coordinate system) were set to be the medial, anterior, and inferior directions of the skull, respectively (see Figure 1).

Finally, a thought on the future directions of the modeling cancer vaccines topic.

This makes it more difficult and time-consuming to yield similar and reliable estimates for both directions of the model-switch integration scheme.