Sentence examples for direction of feed from inspiring English sources

Ft acts on the tool in the direction OX, parallel with the direction of feed.

Because it is reflected in the circumferential direction, the corresponding spatial frequencies in the perpendicular direction of feed direction are difficult to measure.

Furthermore the results show that the surface morphology in turning process depends to a large extent on the direction of feed motion.

This comparison relates to the radius of curvature of the trace left by the cutter at the point of contact between the tool and the workpiece in relation to the direction of feed motion.

For the second ECAP pass, the sheet could be processed in the same orientation as the first pass (route A) or it could be rotated 180° about the direction of feeding (route C).

The identical diffusion direction of the feed solute and the water flux may reduce the effective diffusivity of the solute in the support layer when the feed solution facing the membrane support layer, resulting in high concentrative ICP.

In this condition as shown in Figures 2 and 3, the direction of the feeding velocity and the moving direction of the high-precision stage are both along the positive direction of x axis.

"It took courage to slice it up on the chance of coming up with something else, but life has a way of feeding you from directions you don't expect".

The goal is to resist hitting the brakes, steer in the direction of the skid and feed lots of power to straighten the car and pull out of the skid.

Where c is the nominal contact point, N is the normal of the nominal workpiece surface at contact point c, φ is the angle between cutting tool axis and N, and f is the feed direction of the cutting tool.

At a roller rotation velocity of 0°/ps (pure scratching), the dislocations were observed to nucleate and propagate preferentially along the feed direction of the roller on the Cu film surface; only small changes in the slip vector and no significant phenomenon of backfilling in the Cu film were observed after the scratching process.