Sentence examples for direction of cylinder from inspiring English sources

Thermo-mechanical properties of functionally graded material (FGM) are assumed to be temperature independent and vary continuously in the radial direction of cylinder.

Table 2 shows the initial structural parameters of transducer (B indicate the length of transducer in axial direction of cylinder).

The model block size was 2000 (W) × 2000 (H) × 650 (T) (mm × mm × mm) and the ground stress field was achieved by external compensation method, the maximum output horizontal and vertical direction of cylinders were 3000 kN, and the maximum load intensity was 2.23 MPa.

The visual stimulus was then presented for 2000 ms. At stimulus offset, the fixation point also disappeared and two choice targets corresponding to the two possible directions of cylinder rotation appeared.

The experimental results showed that the rotation changed the separation position of impinging jet flow on the cylinder, and allowed the surface temperature of the cylinder to tend towards uniformity along the circumferential direction of the cylinder.

On the topic of bending, considering the possible arrangements of strips on a cylinder shows that the strip orientation can have a large impact on the amount of bending within the strips as it can range from 0 (following the direction of the cylinder) to totally curved (following the circumference of the cylinder).

The influence on this quantity of the application of a direct-current electric field along the growth direction of the cylinder, together with that of an intense laser field, is particularly considered.

The x axial of the accelerator measures the acceleration in the axial direction of the cylinder, y axial is used to monitor the transverse vibration signal of the cylinder and z axial is defined as the tunneling direction.

β indicates the angle between the acoustic emission direction of the cylinder rock and the trapezoid rock.

It can be seen that high values for the eigenvalues and are associated with a high gray value change in the direction of the cylinder boundary.

Deforming the thermoplastic elastomer in a direction perpendicular to the orientation direction of the cylinders causes rotation of the PS cylinders and the PPE emitter molecules and affords tunable polarized emission due to re-orientation of the PPE containing PS cylinders as well as film thinning from Poisson effect.