Sentence examples for direction measurement from inspiring English sources
The daily average of the direction was then the mean value averaged over the sampling period; the standard deviation was a measure of the variability in wind direction measurement.
It is suitable to operate up to 50̊C and provides accurate wind speed and direction measurement.
Acquired limits of errors for deflection magnitude and deflection direction measurement are ±0.15 mm and ±2.5°, respectively.
Three-point-estimators such as Gaussian estimator, peak centroid estimator, and parabolic estimator are used to improve the resolution of the direction measurement.
The direction measurement is based on the consecutive arrangements of the items, while the connection measurement is based on both the number of disconnections and the Feigin and Cohen model (FCM) in ranking analysis.
Comparisons with a commercial cup anemometer have shown that the proposed architecture, with reduced space occupancy and low power consumption, is suitable to operate in a natural environment in the −20 to +55 °C temperature range providing wind speed and direction measurement.
A new approach to study the performance characteristics of the HERA-B RICH using momenta reconstructed with RICH track direction measurements is presented.
The chapter will also describe tracer investigations, including leakage tests, flow rate determinations, large volume/mass measurements, investigating homogeneity of mixtures, determination of chemical engineering parameters, wear studies, groundwater flow rate, and flow direction measurements.
The accuracy of wind speed and direction measurements with spinning ultrasonic wind sensors is important than ever in today's wind industry in which, they are usually installed on the hub of the wind turbines to measure the wind speed and direction for optimized power.
In [29], vehicle velocity and heading direction measurements are exploited to make constrained optimization for NLOS error mitigation.
Blue solid (open) circles plot the difference between the XYZ stage position setting and the position measured with laser interferometry in +Y direction for the first (second) measurement, and the red solid (open) circles are for the −Y direction measurements.
