Sentence examples for dip speed from inspiring English sources

The dip speed and dip interval of the reciprocating holder were critical operational parameters of 400-DS dissolution apparatus 7 that affected the drug release rate of a sustained release pellet during the individual dissolution study.

Fig. 2 SEM morphologies of the AgNWs/PVC/AgNWs films prepared with different dipping speed and lifting speed by the dip-coating process: a dipping speed = 40 mm/min, lifting speed = 100 mm/min; b dipping speed = 50 mm/min, lifting speed = 100 mm/min; c dipping speed = 60 mm/min, lifting speed = 100 mm/min; d dipping speed = 70 mm/min, lifting speed = 100 mm/min.

Fig. 5 FOM value of a different lifting speed when the dipping speed is 50 mm/min and b different dipping speed when the lifting speed is 100 mm/min.

Figure 2 presents the SEM images of AgNWs films (Side 1) fabricated by the dip-coating process with different dipping speed and lifting speed.

The PVC film was vertically fixed on the dip arm and moved down into the AgNWs suspension at a dipping speed of 40~70 mm/min.

From Fig. 2, it can be seen that the dipping speed and lifting speed also has great influence on the structure of the films.

From Table 1, it can be found that the dipping speed and lifting speed are the important factors to influence the photoelectric properties of the AgNWs/PVC/AgNWs.

The transmittance and sheet resistance have illustrated that the dipping speed of 50 mm/min and the lifting speed of 100 mm/min is the best condition to form a uniform, high performance TCF. Figure 5 shows the FOM values of TCFs which prepared at different dipping speed or lifting speed.

The Y-type deposition of LB film was performed at the targeted pressure with a dipping speed of 10 mm min-1.

The effects of several key processing parameters, including the number of deposition cycles, cationic concentration, dipping speed, and holding/immersing time, have been investigated.

The stable time of dipping glue can be obtained by real-time curve of dipping flux quantity and is only 80 90 ms when dipping speed is from 1.6 to 4.0 cm s−1.