Sentence examples for dip process from inspiring English sources

Double dip process is being followed for Zn alloy coating on wire surface due to non availability of suitable flux.

An effort has been made to develop a suitable flux to obtain Zn 5 wt.% Al alloy coating on wire surface by single hot dip process.

The promising properties of these coating systems are especially illustrated by the fact that many of the PVD coatings with a thickness of 3 4 μm showed a higher oxidation and corrosion resistance than a classical 20 μm thick Al Si coating applied by the hot dip process.

Manna [20] and Nyamannavar et al. [21] reported that effect of fluxing chemical on wire surface by hot dip process and Heat Flux Transients at Solder/Substrate interface.

The modification of the fiber mats and the attachment of the drug delivery systems are easy and scalable dip processes.

The zinc coating, however, has greater adherence than that formed in the hot-dip process.

Coating thickness is easier to control than in the hot-dip process because of the good relationship between electrical current and deposited zinc.

Coating thickness is easier to control here than in the hot-dip process because of the good relationship between electrical current and deposited zinc.

In one hot-dip process, intermetallic compounds of iron and zinc are formed on the surface of the steel or iron being treated by heating it in the presence of finely divided zinc below the melting point of the zinc.

The influence of vanadium on Fe Al interface reaction of steels during hot-dip process was investigated by immersing low carbon steel plates into six different Al and Al Zn baths at 730 °C and 620 °C.

Place in the fridge for a minute, then repeat the dipping process.