Sentence examples for dip length from inspiring English sources

The strike and dip length of the working face are 1160 m and 150 m, respectively.

The fault parameters (locations, strike, dip, length, width, and slip amount) are highly correlated nonlinear parameters.

In Fig. 3b, L is the dip length (m), D is the dip depth (mm), and α is the dip angle (rad).

From Eq. (3), the magnitude of the P2 force is linearly proportional to the dip angle regardless of the dip length.

It can be seen that their magnitudes are related to the dip angles regardless of the dip length, but their frequencies are not related to either dip angles or dip lengths.

(1)From Eq. (1), the relationship between the dip angle α and the dip length L and depth D can be approximately expressed as alpha approx frac{D}{L}pi.

In our previous investigation on track forces [21, 27], the relationship between the track P2 force [18], the wheelset axle box vertical acceleration, the dip lengths and the dip angles was simulated and is shown in Fig. 7.

In our analysis, we assume that the along-dip length of the slipping area W does not exceed 250 km, which is the largest-ever seismologically recorded width and was recorded for the 1964 Alaskan earthquake (Christensen and Beck 1994).

Ambidextrously multitasking, he was marking up the score with a pencil while dipping lengths of toast into two decapitated boiled eggs.

Variations of the fault dip and length have a similar effect on the duration of the phase with additional normal slip as variations of the diffusion constant.

Fault dip, azimuth, length, and shape are all defined by fault pillars, and so do other faults of 3D gridding;   4.