Sentence examples for dimensions of the section from inspiring English sources

However, applying this method to embedded steel elements would face the difficulty that the shape and geometric dimensions of the section might seriously affect the strain measurements.

Dimensions of the sections were selected to promote local buckling, and inhibit other forms of buckling, such as distortional and lateral-torsional buckling.

The dimensions of this section are consistent with a maximum of two to three intermediates simultaneously occupying the middle section.

It is proved that the answer is negative when the dimension of the sections is greater than or equal to 4. For two- three-dimensional sections, both negative and positive answers are given depending on the orders of dual volumes involved, and certain cases remain open.

The dimensions of the cross section within the gage length were 30 mm × 30 mm.

The furnace is modelled as a hollow rectangular box with length much larger than the dimensions of the cross section.

The influence of the geometric dimensions of the sleeve section (i.e. sleeve thickness and sleeve length) on the moment rotation behaviour and the moment resistance of the sleeve connection was particularly studied.

The thin-walled beam is actually a cylindrical shell whose length is much greater than the dimensions of the cross section which, in turn, are much greater than the thickness of the wall.

The design of the front rail, usually consisting of a thin-walled prismatic column, requires definition of the geometry, that is, of the shape and dimensions of the cross section, of the thickness of the material, and of the material itself.

Conductivity values were calculated using the measured resistance and measured sample dimensions of the cross section.

The exhaust system studied has more than 8 m long and the dimensions of the cross sections varies from 1.5 m × 1 m at the inlet section to 2.6 m × 2 m at the outlet section.