Sentence examples for diffuser system from inspiring English sources

However, the diffuser system employed to deliver ozone to the ballast water tanks resulted in patchiness in TRO distribution and toxicity to entrained organisms.

In this follow-up study, the shipboard diffuser system was replaced by a single Venturi-type injection system designed to deliver a more homogeneous biocide distribution.

DOF is found to be an efficient ozonation technique in comparison to the mechanical diffuser system under identical conditions, though the removal efficiencies of coliform bacteria are found to be the same in both cases.

A special 18 m long helium diffuser system and a thermal barrier connector at the quench line flange have been designed and manufactured to avoid local chilling of the vessel wall below the minimum allowed temperature of the material.

Present work focuses on the flow and pressure distribution in piping networks, which has gained importance in many areas such as air distribution in diffuser system of aerobic biological treatment, steam distribution in passive decay heat removal systems, etc.

Impacts to benthic communities from concentrate discharges can be minimized by using properly-designed diffuser systems, designed and located based current and flow modeling.

In the past, there were many attempts to augment the power of wind turbines by means of diffuser systems or similar, but since these attempts did not respect energy- and momentum conservation, they have not been successful.

The biomass concentration is mainly limited by the extremely low oxygen transfer efficiency (OTE) experienced by conventional aeration bubble diffuser systems at mixed liquor total suspended solids (MLSS) concentrations higher than 20 g L−1.

This study adopts techniques of computational fluid dynamics (CFD) to analyze the combined effect of adjacent plumes of an air-diffuser system on its destratification efficiency.

The supersonic ejector-diffuser systems are usually used for cooling by utilizing low-grade thermal energy, but few can be used in subzero refrigeration applications.

Minimizing the energy losses associated with diffusion and also increasing the stable operating ranges of the diffusion systems necessitates developing non-conventional diffuser designs.