Sentence examples for differential volumes from inspiring English sources
The three dimensional space is divided into a large number of differential volumes.
Since the sensitivity distribution is determined from the number of photons passing through differential volumes one can use for an according evaluation directly the sensitivity map.
Consider a representative elementary volume (REV) in Fig. 7, the smallest differential volume resulting in statistically meaningful local average properties.
Figure 12 Adsorption isotherms, differential volume, and area pore distributions of powders obtained at 350°С with different decomposition duration.
Figure 17 Powders' adsorption isotherms, differential volume, and area pore distributions at various ammonia content in complex (350°C, 60 min).
Best match was accepted when the differential volume from the volume of reference and the registered volume (i.e. after subtraction) displayed the least difference in anatomical contours.
The method involves evaluating the charge generated in a differential volume of the chamber and integrating this over the entire volume of the detector.
The differential volume between the initial and designated position of the orbital prosthesis yielded the preferred implant shape required to effect the desired correction of soft tissue.
Figure 5 Adsorption isotherms, differential volume, and area pore distributions of powders obtained at different annealing temperatures (annealing time 30 min).
The differential volume elements (m3) of the fallen and non-fallen zones of the particle cloud in the CDRS are given by {text{d}}V_{1} = frac{{pi left( {R_{1}^{2} - R_{x}^{2} } right)}}{{N_{1} }}{text{d}}z (24) {text{d}}V_{2} = frac{{pi R_{x}^{2} }}{{N_{1} }} {text{d}}z (25)respectively, where ({text{d}}z) is a differential length element (m) along the axial axis of the CDRS.
The trajectories of the particles in conical spouted beds are determined from the vertical component of velocity measured by means of an optical fibre probe and from the horizontal component of velocity calculated by solving the mass conservation equations for the solid in differential volume elements in spout and annular zones.
